2025年06月04日 星期三 首页   |   期刊介绍   |   编 委 会   |   投稿指南   |   期刊订阅   |   弘扬科学家精神专题   |   联系我们   |   English
  2016, Vol. 37 Issue (3): 264-272    
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
辅助质量块—单裂纹悬臂梁耦合系统固有频率的理论研究及其应用
郭金泉,陈垂福,杨晓翔,钟舜聪
1. 福州大学机械工程及自动化学院
2. 福州大学机械工程及其自动化学院
Theoretical and applied research on natural frequencies of cracked cantilever beams with a auxiliary mass
全文: PDF (0 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 本文研究了辅助质量块—单裂纹悬臂梁耦合系统的固有频率,用无缺陷悬臂梁固有振型叠加一个多项式来近似拟合含单裂纹悬臂梁的振型,而后由动力学方法推导了辅助质量块—单裂纹悬臂梁系统的固有频率方程的解析形式,系统频率随着质量块在梁上位置改变而改变,即可得到固有频率曲线,此频率曲线包含了缺陷信息,因此可对固有频率曲线进行平稳小波变换来识别梁上的缺陷。同时用有限元计算结果对上述固有频率理论推导进行验证,有限元结果与本文理论推导结果相一致。最后本文数值计算了质量块大小、缺陷深度、位置等因素对系统固有频率的影响,也探讨了平稳小波变换用于识别损伤,结果验证了该理论推导的可靠性和损伤识别的准确性。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
郭金泉
陈垂福
杨晓翔
钟舜聪
Abstract:In this paper, theoretical research on natural frequencies of cracked cantilever beams with a auxiliary mass are carried out. The transverse deflection of the cracked beam is constructed by adding a polynomial function, which represents the effects of a crack, to the polynomial function which represents the response of the intact beam. Then, the analytical formulation of the distribution of natural frequencies due to auxiliary mass over the beam is obtained through dynamics method. Through the analytical formulation the natural frequencies of the system change due to the roving of the mass along the cracked beam, which was called the natural frequencies curve(NFC). The NFC is shown to compare very well with those obtained using finite element method (FEM). In addition, due to the NFC contains the defect information of the beam, based on the NFC the damage on the beam can easily identify by using stationary wavelet transform (SWT). Finally, the influence to the natural frequency of the system, which caused by the quality block size, defect depth, defect location and other factors, is considered by using the analytical formulation in this paper. The results show the reliability of the theoretical derivation and the accuracy of damage identification.
收稿日期: 2015-10-19      出版日期: 2016-06-21
ZTFLH:  T113.1  
基金资助:炭黑填充橡胶复合材料大变形宏细观力学行为研究;广义热-扩散-化学-力学耦合作用下的金属高温氧化及破坏机理研究;超高温陶瓷复合材料涂层的定量无损评价研究;高功率太赫兹脉冲成像系统及玻璃纤维复合材料缺陷检测和评价研究
通讯作者: 杨晓翔     E-mail: 19546159@qq.com
引用本文:   
郭金泉,陈垂福,杨晓翔,钟舜聪. 辅助质量块—单裂纹悬臂梁耦合系统固有频率的理论研究及其应用[J]. , 2016, 37(3): 264-272.
链接本文:  
http://manu39.magtech.com.cn/Jwk_gtlxxb/CN/     或     http://manu39.magtech.com.cn/Jwk_gtlxxb/CN/Y2016/V37/I3/264
版权所有 © 《》编辑部
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn