|
|
|
| Tensile performance analysis of combined adhesive and bolted joints for plain woven composites |
|
|
|
|
Abstract Experimental work was carried out on the tensile performance of combined adhesively bonded and bolted (a single row) joints for woven composites. The failure forms of the joint were analyzed with 4mm and 6mm diameter bolt hole respectively. A 3-D damage propagation model was established including non-linear touch problem to simulate the mechanical performance of the joints and the FEM results were matched well with the experimental results. It is shown that the adhesive joint can be reinforced with mechanical joint by the shared distribution of applied load to the bolts. The larger the bolt diameter, the more effective is the reinforcement. The analysis of tensile properties of adhesively bonded joint with more than one row of bolts in mechanical joint poses great difficulty and more precautions must be taken for its application. The study results and the analysis method in this paper can provide some relevant reference and technological support for combined adhesive and bolted joint design.
|
|
Received: 04 May 2010
|
|
|
|
|
|
| [1] |
. Three Dimensional Numerical Simulation for Mechanical Behavior of Carbon Black Filled Rubber Composites[J]. , 2013, 34(6): 541-549. |
| [2] |
. INFLUENCE OF SPAN ON THE RESPONSE AND DAMAGE OF COMPOSITE LAMINATE UNDER LOW-VELOCITY IMPACT INDUCED BY LARGE-MASS AND INTERMEDIATE-MASS[J]. , 2013, 34(6): 557-561. |
| [3] |
. MODE I INTERLAMINAR FRACTURE TOUGHNESS FOR Z-PINS REINFORCED C/SiC COMPOSITES[J]. , 2013, 34(5): 466-472. |
| [4] |
. Effective mechanical property of nano coated fiber reinforced composites due to interface stress[J]. , 2013, 34(4): 374-379. |
| [5] |
. Numerical simulation of macro-deformation for ionic polymer-metal composites under the electro-mechanical couple action[J]. , 2013, 34(1): 1-6. |
| [6] |
. ENERGY AND CONTACT FORCE STUDY OF COMPOSITE LAMINATE IMPACT DAMAGE RESPONSE[J]. , 2013, 34(1): 63-72. |
|
|
|
|
2011, Vol. 32 
