|
|
|
| STATIC CHARACTERISTICS AND COHESIVE ZONE MODEL OF JOINT SURFACES IN MACHINE TOOLS |
|
|
|
|
Abstract To satisfy the functional, process and design requirements, each type of machine tool is assembled by various parts or components at certain order instead of a complete and continuous structure, and hence a variety of joint surfaces exist between different parts or components. As the joint surfaces are discrete surfaces, their stiffness and damping affect considerably the static and dynamic performance of the machine tool. In the present paper, model experiments were firstly carried out to characterize the relationship between contact pressure and deformation of nominally plain joint surfaces. The contact behavior of the joint was then simulated using the method of finite elements by simplifying the measured morphology of the joint surfaces as semi-circular or sinusoidal. It was demonstrated that the numerical simulations agreed better with the experimental measurements if the joint surface morphology was taken as semi-circular. Finally, by assuming that the interaction between a pair of joint surfaces is equivalent to cohesion effects, the classical cohesive zone model (CZM) was adopted to analyze the mechanical behavior of the joint. It was established that the model predictions agree well with the experimental results.
|
|
Received: 22 November 2010
|
|
|
|
| [1] |
. Coordinate transformation algorithm for pentamode metamaterial design based on non-linear finite element analysis[J]. , 2015, 36(4): 297-318. |
| [2] |
. Analysis of the influence of cure temperature on interfacial behavior of carbon fibre/epoxy matrix[J]. , 2014, 35(6): 545-551. |
| [3] |
. STUDY ON SOLDER/IMC INTERFACE DELAMINATION OF PBGA BASED ON CZM METHOD[J]. , 2014, 35(4): 400-409. |
| [4] |
. Cohesive zone modeling of spallation in ductile metal[J]. , 2012, 33(5): 465-470. |
| [5] |
. 6σ Robustness Optimization Design of the Crashworthiness of Foam-filled Tapered Thin-walled Structure Based on Kriging Method[J]. , 2012, 33(4): 370-378. |
| [6] |
. Study on the delamination of fiber-metal laminates under low-velocity impact[J]. , 2012, 33(2): 182-188. |
|
|
|
|
2012, Vol. 33 