|
|
|
| Application of SPH-FEM Contact Algorithm in Impact Dynamics Simulation |
|
|
|
|
Abstract Coupling of smoothed particle hydrodynamics (SPH) and finite element method (FEM) can make full use of the superiority of SPH in dealing with large deformation and the high accuracy and efficiency of FEM. This paper calculates the contact between SPH particles and finite elements using meshless particle contact method, and background particles are assigned in the position of FE nodes. The oblique impact between spheral-nosed projectile and steel target and the normal impact between blunt-nosed projectile and steel target are calculated using the SPH-FEM contact algorithm. The fully variable smoothing lengths algorithm is used in SPH and the EBE algorithm is used in FEM. The numerical results of LS-DYNA and the experimental observations validate the accuracy of the SPH-FEM contact algorithm.
|
|
Received: 01 February 2010
|
|
|
|
| [1] |
. Coordinate transformation algorithm for pentamode metamaterial design based on non-linear finite element analysis[J]. , 2015, 36(4): 297-318. |
| [2] |
. CHARACTERISTIC STUDY ON ENERGY DISSIPATIONS IN FLAT LAP STRUCTURE[J]. , 2014, 35(6): 559-565. |
| [3] |
. A receding contact plan problem between two elastic layer[J]. , 2014, 35(5): 507-508. |
| [4] |
. Recent progress in atomic-scale friction[J]. , 2014, 35(5): 417-440. |
| [5] |
. Interface Stress of the coating of steel surface and substrate under the sand shock[J]. , 2014, 35(5): 487-492. |
| [6] |
. INFLUENCE OF SPAN ON THE RESPONSE AND DAMAGE OF COMPOSITE LAMINATE UNDER LOW-VELOCITY IMPACT INDUCED BY LARGE-MASS AND INTERMEDIATE-MASS[J]. , 2013, 34(6): 557-561. |
|
|
|
|
2011, Vol. 32 
